EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta BEFORE Ver 1.0 – Installazione Giulietta AFTER 1 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta 3 • Start removing the silver plastic flange • To remove it start to leverage from the right side of the flange with a plastic flat bar (see arrows on the picture) • Be sure to use a suitable tool for this operation and protect the dashboard with paper tape to avoid to scratch the plastic. 1 2 1 3 Ver 1.0 – Installazione Giulietta 2 2 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta • Remove the 4 screws to release the OEM head unit. Ver 1.0 – Installazione Giulietta 3 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta • In order to place the head unit you must to cut part of the frame shown in the box Ver 1.0 – Installazione Giulietta • This is the result after cut the plastic frame 4 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta Facia adapter EF-AR1-FA.01 (silver) EF-AR1-FA.02 (red) EF-AR1-FA.03 (white) • Mount the metal brackets on the Macrom head unit as indicated paying attention to center the screws on the reference lines of the brackets. Ver 1.0 – Installazione Giulietta 5 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta Connection harness with interface • Connect the head unit to the interface device and place the GPS antenna and the microphone before to close the plastics. Ver 1.0 – Installazione Giulietta 6 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta CORRECT ORIENTATION The orientation provides the positioning of the BLACK surface facing the sky.

• Pay attention to the GPS antenna position. It MUST be looking to the sky as indicated in the above picture. If not positioned correctly the GPS signal is bad and may cause a malfunction of the navigation system. Ver 1.0 – Installazione Giulietta 7 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta 3 2 1 3 1 2 • Insert the snap fastener to the flange frame supplied with the kit.

• To close the flange start from left side then pressing the sides until they are completely looked. Synthesia Mac Keygen App. Ver 1.0 – Installazione Giulietta 8 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta • Now your Macrom entertainment system is ready to play. Ver 1.0 – Installazione Giulietta 9 EF-AR1-5561 Easy fit M-DVD5561R for Alfa Romeo Giulietta ALDINET Spa. Colombo, 8 - 20090 Trezzano s/N (MI) Italy Ver 1.0 – Installazione Giulietta 10.

/ 5 years ago / Check out our new Facebook group: Installation tutorial for our popular Mini H1 Bi-xenon projector twin kit done on the Alfa Romeo 147 headlight. We show how to bake and open the headlight and mount the xenon projectors. At the end of the video we compare the halogen light output to plug & play xenon and Bi-xenon retrofit projectors Mini H1. Italian: Guida di installazione per il nostro popolare Mini H1 bi-xeno kit proiettore gemello fatto sulla Alfa Romeo 147 faro. Mostriamo come cuocere e aprire il faro e montare il proiettori allo xeno. Alla fine del video si confronta l'emissione di luce alogena per plug & play xeno e bi-xeno retrofit proiettori H1 Mini. 0:01 Bake the headlight.

We use a big carton box with a heatgun. We put the headlight on small boxes so the hot air will be blown under the headlight, not only on one side. 0:09 In this case we use a 500W heatgun for 15 minutes.

0:14 Start to pry the headlight. In this case it is perma-sealed, so the seal doesn't really get soft, you will need to cut the sealing with the screw driver. 0:37 After working a couple of minutes the headlight housing cools down, heat it up again for a few minutes. 0:40 Work with patience and not too much force.

This headlight took us 20 to 30 minutes to open properly. 1:04 Cut the remaining permaseal off the headlight lens using a sharp knife. 1:10 Scrape the remainign permaseal out of the headlight channel using a flathead screw driver.

1:18 Remove the bulb glare cap. 1:34 To mount the Bi-xenon projector, break the glare cap holder away.

Installazione Connect Nav Alfa 147. Installazione della sola presa USB nel vano portaoggetti a sinistra del volante su. Installazione Connect Nav Alfa 147 Jtdm GB. Installazione Connect Nav Alfa 147. 4/17/2017 0 Comments Tutorial installazione interfaccia AUX. Installazione Connect Nav Alfa 147 Jtdm.

2:05 Remove the bulb clip holder from the projector. The Bulimia Help Method Ebook Library there. 2:10 Mount the Mini Gatling Gun shroud with the 4 supplied screws. 2:19 Remove the black plug from the solenoid wires. 2:21 Insert the wires through the glare cap opening. 2:24 Place the rubber ring on the Mini H1 projector shaft. In this case the thin ring is used to give more thread length for the nut.